D1275 E 1/16 3F

BASF D-1275 - это надежный адсорбент на никелевой основе, обеспечивающий эффективное удаление следов серы из сырья в установках риформинга и изомеризации нафты.



Форма заказа
Оставьте заявку - наш менеджер свяжется с Вами и уточнит детали Вашего заказа.
Sulfur Guard Bed Adsorbent
BASF D-1275 is a Nickel basedadsorbent whichprovides efficient removal of trace levels of sulfur fromfeeds to naphtha reformers and isomerization units.

BASF D1275 is produced asstar-shaped extrudates witha nominal diameterof 1/16” (1.6 mm). It is delivered pre-reduced andpassivated.

D 1275 is highly effective in theremoval of trace amounts of sulfur fromliquid streams.
Product Applications
  • Removal of various sulfur species (H2S, COS, mercaptans, sulfides, disulfides and thiophenes) from feed streams used innaphtha reformers. The naphtha typically comes from anHDS unit equipped with a stripper, orfrom hydrocrackers.

  • Removal of various sulfur species(mercaptans, sulfides) from feedstreams to isomerization units.

Pre-Treatment
Prior to start-up, the bed must be activated by removing the passivation. This can be performed by using the feed tobe treated (hot oil activation). Maximumperformance can be achieved by using a hydrogen containing stream attemperatures of 150 –180°C.
Table 1
Typical properties
Chemical
Ni, wt% 56
Physical
Surface Area, m2/g ~ 185
Packed Average Bulk Density, kg/m3(lbs/ft3) ~820 (~51)
Bulk Crush Strength ~ 0.8 MPa (116 psi)
Packaging
Steel drum, 125 kg (275 lbs) net

Shipping Point
De Meern, The Netherlands

Контакты
+7 (499) 608-10-15
Московская обл., Ленинский р-н, с. Беседы, Промышленный проезд, дом 7